TM 9-2330-334-13&P
SIDE REAR MARKER LIGHTS DO NOT ILLUMINATE-Continued
0017 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Side Rear Marker Lights Do Not Illuminate.
Change 1
0017 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is continuity present across
circuit breaker CB3?
No.
Replace circuit breaker CB3
(WP 0057 00).
1.
Set multimeter to ohms.
Yes.
Go to (Indication/Condition
2).
2.
Disconnect 24 VDC
intervehicular cable
connector from voltage
converter box on trailer.
3.
Remove two screws and
raise lid on voltage converter
box.
4.
Connect positive (+) probe
of multimeter to one
terminal on CB3.
5.
Connect negative (-) probe
of multimeter to other
terminal on CB3 and note
reading on multimeter.