TM 9-2330-334-13&P
SIDE REAR MARKER LIGHTS DO NOT ILLUMINATE-Continued
0017 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Side Rear Marker Lights Do Not Illuminate - Continued.
0017 00-3/4-Blank
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
2.
Is 18-30 VDC present at 24
VDC intervehicular cable
connector pin E?
No.
Replace 24 VDC
intervehicular cable (WP
0062 00).
1.
Set multimeter to VDC.
Yes.
Replace voltage converter
box (WP 0058 00).
2.
Connect positive (+) probe
of button probe to 24 VDC
intervehicular connector pin
E.
3.
Connect negative (-) probe
of button probe to a known
good ground.
4.
Position master power
switch to on (TM 9-2320-
392-10).
5.
Position main light switch to
SER DRIVE and note reading
on multimeter.
END OF WORK PACKAGE