TM 9-2330-334-13&P-1
FRONT MARKER LIGHTS DO NOT ILLUMINATE-Continued
0014 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Front Marker Lights Do Not Illuminate - Continued.
0014 00-3
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
2.
Is continuity present across
circuit breaker CB7?
No.
Replace circuit breaker CB7
(WP 0057 00).
1.
Set multimeter to ohms.
Yes.
Go to (Indication/Condition
3).
2.
Remove two screws and
open voltage converter box.
3.
Connect positive (+) probe
of multimeter to one
terminal on circuit breaker
CB7.
4.
Connect negative (-) probe
of multimeter to other
terminal on circuit breaker
CB7 and note reading on
multimeter.