TB 9-2330-334-13&P-1
FRONT MARKER LIGHTS DO NOT ILLUMINATE-Continued
0014 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Front Marker Lights Do Not Illuminate - Continued.
Change 1
0014 00-4
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
3.
Is continuity present from
TL260 to a known good
ground?
No.
Repair wire 105 or replace
main electrical harness (WP
0066 00).
1.
Set multimeter to ohms.
Yes.
Replace main electrical
harness (WP 0066 00).
2.
Connect positive (+) probe
of multimeter to TL260.
3.
Connect negative (-) probe
of multimeter to a known
good ground and note
reading on multimeter.
END OF WORK PACKAGE