0016-7
TM 9-2330-335-14&P
0016
8
(Con’t)
Semiannual
or Every
6,000 Miles
Leaf Springs
and Attaching
Parts
2. Any leaf or portion of any leaf in
any spring assembly is missing or
separated.
Leaf is missing or separated.
NOTE
The three bottom leaves of each
spring pack are the main leaves in
each pack.
3. Any broken main leaf in a spring
assembly.
Main leaf is not replaced.
9
Semiannual
or Every
6,000 Miles
HUBODO-
METER®
Check HUBODOMETER® bracket and
gage for looseness and missing hardware.
Torque gage nut to 15 lb-ft (20.3 Nm)
max.
10
Semiannual
or Every
6,000 Miles
Hub Caps
CAUTION
• Do not use paints or solvents on
HUBODOMETER®
polycarbonate face.
•
Do not stand on HUBODOMETER®.
• Failure to comply could result in
damage to equipment.
NOTE
• If HUBODOMETER® has a bent
or stripped stud, case damage,
improper bracket, or hardware or
case tampering, it will not perform
properly.
• Inside of hub cap should have a
light coat of grease. Do not plug
vent hole.
Check hub caps (4 ea.) for leaks, damage,
and missing hardware and torque nuts to
15 lb-ft (20.3 Nm) max.
11
Semiannual
or Every
6,000 Miles
Reflectors
If screws are removed/replaced apply
a light coat of antiseize compound to
all threads.
Table 1. Organizational Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
MAN-
HOURS
LOCATION
ITEM TO
CHECK/
SERVICE
PROCEDURE
NOT FULLY MISSION
CAPABLE IF: