TM-9-2330-335-14-P

SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)

SEPTEMBER 2008

TM-9-2330-335-14-P - Page 120 of 640

TM 9-2330-335-14&P

0016-2

0016

Table 1. Organizational Preventive Maintenance Checks and Services (PMCS).

ITEM

NO.

INTERVAL

MAN-

HOURS

LOCATION

ITEM TO

CHECK/

SERVICE

PROCEDURE

NOT FULLY MISSION

CAPABLE IF:

NOTE

• Perform Operator PMCS prior to,

or in conjunction with, Organiza-

tional PMCS if there is a delay

between daily operation of the

equipment and the Organizational

PMCS or regular operator is not

assisting/participating.

• Clean axle and suspension system

with low-pressure water and fiber

brush to allow for careful inspec-

tion.

1F

i

r

s

t

M

o

n

t

h

or First 1,000

Miles of

Operation

Suspension

Initial Torque

a. Torque suspension nuts to the

following in-service DRY torque values:

1-1/8 in.-12 UNF. . 880 lb-ft (1,193 Nm)

3/4 in.-16 UNF . . . . .300 lb-ft (407 Nm)

5/8 in.-18 UNF . . . . .180 lb-ft (244 Nm)

Torque service requirements/

schedule are not met. Nuts or

bolts are damaged.

b. New replacement installations/

hardware should have WET (oiled)

fasteners. The following wet torque

values apply:

1-1/8 in.-12 UNF . .670 lb-ft (908 Nm)

3/4 in.-16 UNF . . . .220 lb-ft (298 Nm)

5/8 in.-18 UNF . . . .130 lb-ft (176 Nm)