TM-9-2330-335-14-P

SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)

SEPTEMBER 2008

TM-9-2330-335-14-P - Page 123 of 640

0016-5

TM 9-2330-335-14&P

0016

3

(Con’t)

Semiannual

or Every

6,000 Miles

Kingpin

6. No burrs, nicks, or gouges are

allowed on the lower collar area of the

kingpin below the locking area. Notify

Direct Support Maintenance to replace

kingpin.

Damage meets or exceeds

criteria.

CAUTION

Direct Support Maintenance:

When replacing kingpin, inspect

all supporting structures for rust,

broken

welds,

and

proper

drainage. Structure area interior

must be inspected and protected

against rust. Proper drainage

must be maintained. Failure to

comply could result in damage

to equipment.

7. The area against the bolster plate

and locking area on the kingpin should

have no more than 10 burrs, nicks, or

gouges that exceed 0.06 in. (1.5 mm) in

depth on the entire surface area. If these

criteria are met or exceeded, replace the

kingpin. Notify Direct Support

Maintenance.

Damage meets or exceeds

criteria.

Table 1. Organizational Preventive Maintenance Checks and Services (PMCS) - Continued.

ITEM

NO.

INTERVAL

MAN-

HOURS

LOCATION

ITEM TO

CHECK/

SERVICE

PROCEDURE

NOT FULLY MISSION

CAPABLE IF:

447-0041