CONDITION/INDICATION
Can trailer main harness wire 1012-2 be repaired?
DECISION
Repair - Repair wire 1012-2 (WP
0055). Go to (Step 8 - Do front side markers lights, rear side marker lights, and
rear marker lights operate?) to verify problem is solved.
No Repair - Replace trailer main harness (WP
0059). Go to (Step 8 - Do front side markers lights, rear side marker
lights, and rear marker lights operate?) to verify problem is solved.
STEP 5
Does test equipment pass offset test?
1.
Have assistant turn OFF lights. Refer to vehicle Operator's manual (WP
0190).
2.
Have assistant turn engine start switch to OFF. Refer to vehicle Operator's manual (WP
0190).
BLACK
RED
Figure 5.
Button Probe Leads.
3.
Connect button probe cable red and black leads together.
4.
Perform ICE Offset Test 91.
CONDITION/INDICATION
Does test equipment pass offset test?
DECISION
Yes - Go to (Step 6 - Is continuity measured across wire 1012B between diode assembly connector, terminal 5 and
rear junction box?).
No - Test equipment failed offset. Contact your Supervisor.
TM 9-2330-342-23&P
0006
0006-6