INSTALLATION - Continued
1
2
Figure 4.
Air Reservoir No. 3 Installation.
2.
Install air reservoir (Figure 4, Item 2) on air reservoir brackets (Figure 5, Item 7) with four screws (Figure 5,
Item 9) and locknuts (Figure 5, Item 8).
1
2
3
4
5
7
8
9
6
Figure 5.
Air Reservoir No. 3 Installation.
3.
Install two clamps (Figure 5, Item 3), screws (Figure 5, Item 4), and locknuts (Figure 5, Item 5) on
crossmembers (Figure 5, Item 6).
4.
Install air hose 2143 (Figure 5, Item 2) on fitting (Figure 5, Item 1).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
TM 9-2330-342-23&P
0070
0070-4