TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 931 of 1348

FIELD MAINTENANCE

ISO LOCK STOWAGE BRACKET REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP

0194, Table 1, Item 47)

Materials/Parts

Locknut Qty:

3 (WP

0195, Table 1, Item 6)

Rope, Wire Qty:

2 Piece 22 in. (56 cm) Long

(WP

0195, Table 1, Item 74)

Swagging Sleeve Qty:

4 (WP

0195, Table 1, Item

7)

Personnel Required

Wheeled Vehicle Mechanic (2)

References

Fig. 42 (WP

0177)

Fig. 44 (WP

0179)

Equipment Condition

Wheels chocked (TM 9-2330-342-10). (WP

0190)

REMOVAL

NOTE

•

Both ISO locks are removed the same way. Outboard ISO lock shown.

•

Note position of ISO locks prior to removal to ensure proper installation.

1.

Remove gravity lock hitch pin (Figure 1, Item 4) and ISO lock (Figure 1, Item 6) from ISO lock stowage bracket

(Figure 1, Item 5).

1

2

3

4

5

6

7

Figure 1.

ISO Lock Stowage Bracket Removal.

2.

Repeat Step (1) for inboard ISO lock (Figure 1, Item 7).

TM 9-2330-342-23&P

0111

0111-1