TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 942 of 1348
REFLECTOR BRACKET REPLACEMENT - Continued
1
4
3
2
Figure 4.
Reflector Bracket Replacement.
INSTALLATION
Install mounting bracket (Figure 4, Item 4) on frame (Figure 4, Item 2) with two self-tapping screws (Figure 4,
Item 1) and locknuts (Figure 4, Item 3).
END OF TASK
DATA PLATE REPLACEMENT
WARNING
Wear proper eye protection when drilling and grinding. Drilling and grinding operations are
hazardous to the eyes. Failure to comply may result in injury or death to personnel.
NOTE
•
Number of pop rivets may vary depending on which data plate is being replaced.
•
If data plate is secured with self-tapping screws, proceed to Step (2).
REMOVAL
1.
Drill out pop rivets (Figure 5, Item 3) and remove data plate (Figure 5, Item 4) from trailer (Figure 5, Item 1).
TM 9-2330-342-23&P
0113
0113-4
Back to Top
