TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 459 of 528

TM 9-2330-356-14

c.

Separator Valive (Fig. 8-24).

NOTE

It Is not necessary to remove valve to

disassemble.

(1)

Removal.

Remove valve from filter/separator

(para 4-83).

(2)

Disassembly.

(a)

Remove cover (1) from the body (10).

Remove O-ring (2).

NOTE

Spring (3), retainer (5), and disc (6) are loose

items. Ensure that they do not become lost.

(b)

Remove spring (3), retainer (5), and disc

(6). Bearing (4) is pressed into cover (1).

(c)

Unscrew seat (7) from body (10).

Remove O-ring (9). Bearing seat (8) is pressed into seat

(7).

(d)

Disconnect tubes (fig. 8-22) from body

(10).

(e)

Remove four screws (11). Remove body

(10) and O-ring (12). Remove O-ring (13).

(3)

Cleaning and Inspection.

WARNING

Dry cleaning solvent P-D-680 is toxic and

flammable. Always wear protective goggles

and gloves, and use only in a well-ventilated

area. Avoid contact with skin, eyes, and

clothes, and DO NOT breathe vapors. DO

NOT use near open flame or excessive heat.

The solvent’s flash point is 100°F-138°F

(38°C-59°C). If you become dizzy while

using cleaning solvent, immediately get fresh

air and medical help. If solvent contacts eyes,

immediately wash your eyes with water and

get medical aid.

(a)

Clean all metal parts in dry cleaning

solvent (item 11, Appendix E) and dry

thoroughly.

Figure 8-24. Separator Valve.

TA113227

8-29