TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 462 of 528

TM 9-2330-356-14

e.

Installation.

Install emergency valve to tank sump

(para 4-85).

8-21.

a.

Deadman Control Valve (M970 and

M970A1) (Fig. 8-27)

Removal and Disassembly.

(1) Pull hose reel hoses out far enough to remove

deadman control.

(2) Remove two screws and nuts (fig. 8-27) on the

deadman control to free the valve assembly.

(3) Disconnect the two hoses from the valve

assembly and remove valve.

(4) Drive out roll pin securing the lever to the

handle guard and remove lever.

b.

Assembly and Installation.

(1) Aline holes in lever (fig. 8-27) and handle

guard. Drive in roll pin to secure lever.

(2) Thread red hose through opening in handle

guard (fig. 5-27), and attach to OUT port of valve

assembly. Attach green hose to IN port of valve assembly.

(3) Replace valve assembly in handle guard of

deadman control. Secure with two screws and nuts.

(4) Pull hoses to release latch on hose reel and

rewind the hoses.

Figure 8-27. Deadman Control.

TA113230

8-32