TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 675 of 1364

TM 9-2350-238-20-1

3

Tag and disconnect shell connector (3) from transmission oil temperature sending unit.

4

Tag and disconnect shell connector (4) from transmission oil high temperature warning switch.

5

Remove screw (5) and ground cable terminal (6) from bulkhead.

6

Tag and disconnect plug connector (7) from throttle limiting solenoid valve.

7

Tag and disconnect shell connector (8) from line connection.

8

Tag and disconnect plug connector (9) from air box heater bracket receptacle connector.

9

Tag and disconnect shell connector (10) from engine water temperature sending unit.

10

Tag and disconnect shell connector (11) from engine water temperature warning switch.

11

Tag and disconnect shell connector (12) from engine low oil pressure warning switch.

12

Tag and disconnect shell connector (13) from engine oil pressure sending unit.

13

Remove bulkhead disconnect to engine components and warning units branched wiring harness

(14) from powerplant.

DISASSEMBLY

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

3

For repair of shell connectors and cable terminals, refer to general maintenance, page 2-371.

4

Electrical wire is a manufactured item, refer to appendix D.

5

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-649