TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 679 of 1364

TM 9-2350-238-20-1

Failure to remove or disconnect batteries before removing or installing any electrical

wiring harness or lead may result in injury or damaged equipment.

1

Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc. Remove only the hardware which secures the wiring harness or lead

which is being removed.

2

Tag and disconnect plug connector (1) from receptacle connector (2).

3

Tag and disconnect shell connector (3) from 15 AMP circuit breaker (4).

4

Tag and disconnect plug connector (5) from fan (6).

5

Remove screw (7) and ground cable terminal (8) from bulkhead.

6

Disconnect five shell connectors (9) from driver’s instrument panel (10) at the following points:

a.

Tag and disconnect shell

b.

Tag and disconnect shell

c.

Tag and disconnect shell

d.

Tag and disconnect shell

connector from line connection.

connectors from starter switch (11).

connector from instrument switch (12).

connector from master switch (13).

2-653