TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 686 of 1364
TM 9-2350-238-20-1
2-91. MAINTENANCE OF SUSPENSION LOCKOUT SYSTEM WARNING LIGHT
GROUND AND HORN GROUND ELECTRICAL LEADS (CONT).
1
2
Failure to remove or disconnect
batteries before removing or installing
any electrical wiring harness or lead
may result in injury or damaged
equipment.
Wiring harnesses and leads are secured to
the hull and components with loop clamps,
straps, clips, ground screws, etc. Remove
only the hardware which secures the
wiring harness or lead being removed.
Disconnect cable terminal (1) from driver's
instrument panel ground.
3
Tag and disconnect shell connector (2)
from suspension lockout system warning
light.
4
Remove suspension lockout system
warning light ground electrical lead (3)
from hull through driver's compartment.
5
Disconnect cable terminal (4) from horn
ground.
6
Tag and disconnect shell connector (5)
from horn.
7
Remove horn ground electrical lead (6)
from hull through driver's compartment.
2-660
Back to Top
