TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 683 of 1364

TM 9-2350-238-20-1

1

Install bulkhead disconnect to driver’s control branched wiring harness (1) in hull.

2

Install receptacle connector (2) and four screws (3) on bulkhead.

3

Connect plug connector (4) to receptacle connector (2).

4

Connect four shell connectors (5) at the following points:

a.

Untag and connect two shell connectors to driver's external engine and XMSN

warning light.

b.

Untag and connect shell connector to 15 AMP circuit breaker.

c.

Untag and connect shell connector to line connection.

5

Install receptacle connector (6) and four screws (7) on bulkhead.

6

Connect plug connector (8) to receptacle connector (6).

2-657