TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 688 of 1364

TM 9-2350-238-20-1

2-92. MAINTENANCE OF LINE CONNECTION TO RIGHT HEADLAMP DISCONNECT

BRANCHED WIRING HARNESS (CONT).

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

may result in injury or damaged

equipment.

1

Wiring harnesses and leads are secured to

the hull and components with loop clamps,

straps, clips, ground screws, etc. Remove

only the hardware which secures the

wiring harness or lead being removed.

DISASSEMBLY

2

Tag and disconnect seven shell

connectors (1) from line connections of

right headlamp disconnect branched wiring

harness.

3

Remove four screws (2) and four washers

(3) and disconnect receptacle connector

(4) from light harness connector.

4

If damaged, remove gasket (5) from

receptacle connector (4).

5

Remove line connection to right headlamp

disconnect branched wiring harness (6)

from hull.

For disassembly of wiring harness receptacle connector, refer to general maintenance, page 2-371.

2-662