TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 826 of 1364

TM 9-2350-238-20-1

2-137. MAINTENANCE OF HYDRAULIC POWER SUPPLY LINES AND FITTINGS (AFT

SECTION) (CONT).

REMOVAL (CONT)

19

20

21

22

23

24

25

26

27

28

Disconnect tee to pump metal tube as-

sembly (29) from tube nipple (30).

Remove tube nipple (30) with preformed

packing (31) from slip ring and pump

assembly (24).

Remove preformed packing (31) from tube

nipple (30).

Loosen locknut (32) on tee (13), and dis-

connect tee to pump metal tube assembly

(29) from tee.

Loosen locknut (33) on tube tee (11), and

remove safety relief valve (34) from tube

reducer (35) and tube tee.

Remove tube tee (11) with attached parts

from hull.

Remove preformed packing (36), packing

retainer (37), and locknut (33) from tube

tee (11).

Remove tube reducer (35), preformed

packing (38), and preformed packing (39)

from tee (13).

Remove preformed packing (38) and

preformed packing (39) from tube reducer

(35) .

Remove locknut (32) from tee (13).

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

Fluid filter is a repairable assembly. Refer to page 2-803.

3

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-800