TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 846 of 1364

TM 9-2360-238-20-1

2-141. MAINTENANCE OF PARKING BRAKE ASSEMBLY (CONT).

REASSEMBLY (CONT)

4

Install new spring pin (5) and brake

support pin (6).

5

Install leaf spring (7).

6

Install two flat washers (8) and two

machine screws (9).

7

Install pawl (10) with attached parts.

8

Install retaining ring (11).

9

Install parking brake bracket (12).

10

Install two new Iockwashers (13) and two

machine bolts

ADJUSTMENT

1

Install parking

page 2-814.

(14).

brake assembly. Refer to

2

Adjust parking brake. Refer to page 2-814.

2-142. MAINTENANCE OF MECHANICAL BRAKE CONTROL AND LINKAGE.

This task covers:

a.

Removal

c.

Installation

b.

Inspector/Repair

d.

Adjustment

INITIAL SETUP

Tools and Special Tools

Sealing compound (item 37, appx C)

Automotive maintenance and repair shop

Sealing compound (item 38, appx C)

equipment: organizational maintenance,

Self-locking nut (2)

common no. 1 (less power) (item 80,

Spring pin (2)

appx B)

. Torque wrench (0 to 170 ft-lb)

References

Brake adjustment splined wrench (item 34,

TM 9-2350-238-10

appx G)

TM 9-2350-238-24P-1

Brake adjustment splined wrench (item 35,

appx G)

Equipment Conditions

Wood blocks

2-938 Hull transmission compartment

deck assembly removed

Materials/Parts

2-816 Braking shaft and ratchet

Gasket (2)

installed

Lockwasher

Parking brake released

Lockwasher (4)

2-820