TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 849 of 1364

TM 9-2350-238-20-1

5

6

8

9

10

11

12

13

14

15

16

Partially install straight

driver’s compartment.

shaft (8) into

Install ring spacer (9) and retaining ring

(10) on straight shaft (8).

Install retaining ring (11) inside manual

control lever (12).

Lubricate blind spline of straight shaft (8).

Refer to TM 9-2350-238-10. Align with

blind spline in manual control lever (12),

and install manual control lever.

From driver’s compartment side, push

against straight shaft (8) so that manual

control lever (12) is forced flush against

remote control lever (3). Ensure that ring

spacer (9) and retaining ring (10) are

seated on straight shaft (8).

Install brake clip assembly (13), groove

pulley (14), brake control cable (15), and

sleeve bearing (16).

Install flat washer (17) and shoulder screw

(18).

Install two flat washers (19), two hexagon

plain nuts (20), and two new self-locking

nuts (21) on brake control cable (15).

Install tube coupling (22) and brake pedal

(23) on straight shaft (8).

Apply sealing compound (item 37, appx C)

to threads of pipe plug (24). Install and

torque pipe plug at 20 to 23 ft-lb (27 to 31

N-m).

Connect three electrical connectors (25) of

brake warning sensitive switch.

Set parking brake.

2-823