TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993
CHANGE 1

  TM-9-2350-238-20-2 - Page 141 of 495

WARNING
TM 9-2350-238-20- 2
INSPECTION/REPAIR
1
Check for broken, damaged, or missing parts .
2
Repair is by replacement of authorized parts (TM 9-2350-238-24P-2) .
REASSEMBLY
1
2
3
4
5
6
7
Dry cleaning solvent is toxic an d
flammable. Wear protective goggle s
and gloves and use only in well-
ventilated areas .
If operator’s cupola lid cushioning pad (1)
was removed, use dry cleaning solven t
(item 10, appx C) and wire brush t o
remove residual adhesive from undersid e
of cupola vehicle hatch door (2) .
Apply epoxy resin adhesive (item 2, appx
C) to bonding surfaces of operator’s
cupola lid cushioning pad (1) and under-
side of cupola vehicle hatch door (2). In-
stall new cupola lid cushioning pad .
Install woodruff key (3) in outer cupol a
door handle (4) .
Install spring tension clip (5) to outer
cupola door handle (4) and secure wit h
two new Iockwashers (6) and tw o
machine screws (7) .
Apply sealing compound (item 17, app x
C) to threads of cupola inner handle kno b
(8) and install on door handle (9) .
Install sleeve bearing (10), flat washer
(11), and outer cupola door handle (4) t o
cupola vehicle hatch door (2) .
Install sleeve bearing (12), flat washer
(13), door handle (9), flat washer (14) ,
and new self-locking nut (15) to undersid e
of cupola vehicle hatch door (2) .
2-10 1


Back to Top