TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 146 of 495

WARNING

TM 9-2350-238-20- 2

2-39. MAINTENANCE OF CAB ASSEMBLY STOWAGE COMPARTMENT DOOR S

(CONT) .

INSTALLATION (CONT )

NOT E

6

Steps 5 thru 9 are written for in-

stallation of rear cab stowage hatc h

door .

7

Dry cleaning solvent is toxic an d

flammable. Wear protective goggle s

and gloves and use only in well-

ventilated areas .

8

5

Remove residual adhesive from rear ca b

stowage hatch door (17) using dry clean-

ing solvent (item 10, appx C) and wir e

9

brush .

Apply epoxy resin adhesive (item 2, appx

C) to new nonmetallic gasket (18) an d

mounting area of rear cab stowage hatc h

door (17). Install new nonmetallic gaske t

(18) .

Install door handle (19) to rear cab stow-

age hatch door (17) and secure with thre e

new Iockwashers (20) and three cap-

screws (21) .

Install door handle lock-release lever (22) ,

flat washer (23), new Iockwasher (24) ,

and capscrew (25) .

Install rear cab stowage hatch door (17)

on hinges (26). Install slotted nut (27) an d

new cotter pin (28) to secure .

2-10 6