TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 150 of 495

TM 9-2350-238-20- 2

2-41. MAINTENANCE OF OPERATOR’S AND RIGGER’S SEAT (CONT) .

INSPECTION/REPAI R

1

Check for broken, damaged, or missing parts .

2

Vehicular seat is a repairable assembly. Refer to page 2-111 .

3

Repair is by replacement of authorized parts (TM 9-2350-238-24P-2) .

INSTALLATIO N

1

2

3

4

5

NOT E

The following procedures are writte n

for one seat but apply to both th e

operator’s and rigger’s seats .

Install vehicular safety belt (1) o n

vehicular seat (2) .

Install vehicular seat (2) and seat pos t

support (3). Secure seat post support wit h

two hexagon capscrews (4), four ne w

Iockwashers (5), and two hexagon plai n

nuts (6) .

Install one end of two vertical adjust ten-

sion helical extension springs (7) to vehic-

ular seat (2).

Install other end of vertical adjust tensio n

helical extension springs (7) to seat pos t

support (3) .

Adjust vehicula r

position .

seat (2) to desire d

2-11 0