TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 148 of 495

WARNING

TM 9-2350-238-20- 2

2-40. MAINTENANCE OF UPPER AND LOWER LEFT CAB STOWAGE VEHICLE HATC H

DOORS (CONT) .

INSPECTION/REPAIR

1

Check for broken, damaged, or missing parts .

2

If cab stowage covers are broken, damaged, or missing, repair is by replacement of nex t

higher assembly .

3

Repair is by replacement of authorized parts (TM 9-2350-238-24P-2) .

REASSEMBLY

1

2

3

4

5

Dry cleaning solvent (SD2) is toxic

and flammable. Wear protective gog -

gles and gloves and use only in well-

ventilated areas .

If nonmetallic seal (1) was removed, clea n

residual rubber adhesive from mountin g

surface on back side of lower cab stow-

age cover (2) using dry cleaning solven t

(item 10, appx C) and wire brush .

Apply epoxy resin adhesive (item 2, appx

C) to mounting surface of lower ca b

stowage cover (2) and new nonmetalli c

seal (1). Install new nonmetallic seal o n

back side of lower cab stowage cover .

Install two straight shafts (3), two stow -

age door compartment locks (4), eigh t

machine screws (5), eight new lockwash -

ers (6), and eight hexagon plain nuts (7) .

Install two new Iockwashers (8), two fla t

washers (9) and two machine screw s

(10) .

Install two stowage compartment doo r

handles (11) on lower cab stowage cove r

(2) and secure with two screws (12) .

2-10 8