TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 292 of 796
OXYGEN CYLINDER REGULATOR VALVE INSTALLATION
1.
Remove protective cap (Figure 1, Item 1) from oxygen bottle (Figure 1, Item 2) and position regulator valve
(Figure 1, Item 3) so that gauges are legible. Tighten nut (Figure 1, Item 4).
2.
Operate regulator, refer to TC 9-237 (WP 0131).
Figure 1.
Oxygen Regulator Installation.
END OF TASK
ACETYLENE CYLINDER REGULATOR VALVE INSTALLATION
1.
Remove hull outlet fitting plug (Figure 2, Item 1).
2.
Position regulator valve (Figure 2, Item 3) so that gauges are legible and tighten nut (Figure 2, Item 2).
3.
Operate regulator, refer to TC 9-237 (WP 0131).
Figure 2.
Acetylene Regulator Installation.
END OF TASK
TM 9-2350-256-10
0053
0053-2
Back to Top
