TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 282 of 796
OPERATING EXOTHERMIC CUTTER
1.
Ensure that selected contact tip is appropriate size for cutting rod being used.
2.
Connect black end of exothermic cutter cable (Figure 5, Item 2) to black end of cable (Figure 5, Item 1).
3.
Connect red end of striker plate cable (Figure 5, Item 3) to red end of cable (Figure 5, Item 1).
Figure 5.
Exothermic Cutter.
TM 9-2350-256-10
0052
0052-10
Back to Top
