TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 707 of 796
OPERATOR MAINTENANCE
OXYGEN CYLINDER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Materials/Parts
Oxygen cylinder (WP 0132, Table 1, Item 38)
Personnel Required
Crewman (3)
References
General maintenance instructions (WP 0102)
WARNING
•
Ensure proper lifting techniques are followed when removing or installing heavy
components. Refer to table, Maximum Lifting Capacity for Personnel (WP 0102),
for guidance when lifting and carrying objects. Use assistant(s) and/or suitable
lifting device when lifting heavy parts of components. Failure to comply may result
in personnel death, injury, and/or damage to equipment.
•
Oxygen gas is stored under extremely high pressure. Ensure protective cap is in
place when cylinder is not in use. High pressure oxygen may explode. Failure to
comply may result in personnel death, injury, and/or damage to equipment.
•
Ensure oxygen cylinder valve is turned off and regulator gauges read 0 psi (0 kPa)
before removing regulator valve. Oxygen is under high pressure. Failure to comply
may result in personnel death, injury, and/or damage to equipment.
TM 9-2350-256-10
0124
0124-1
Back to Top
