TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 579 of 772

TM 9-2350-260-20-1-2

PRIMARY FUEL FILTER ELEMENT REPLACEMENT (2D ENGINE) (Sheet 5 of 5)

8.

Using another person, set FUEL PUMPS switch

(L) on master control panel at driver's station to

ON.

9.

Set MASTER CONTROL switch (M) to ON and

observe air release (bubbles) from bleed cap (K).

10.

Set MASTER CONTROL switch (M) to OFF and, after about 1 minute, repeat step 9.

11.

Repeat steps 9 and 10 until a steady flow of fuel

comes out of bleed cap (K), then close bleed cap

(K) and set MASTER CONTROL switch to OFF.

12.

Using adjustable wrench, tighten bleed cap (K) enough so it cannot be opened with the fingers.

13.

Close front left intake grille door (TM 9-2350-260-10).

End of Task

TA148385

7-310