TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 581 of 772

TM 9-2350-260-20-1-2

FUEL PRIMER INLET LINE TUBE ASSEMBLY REPLACEMENT (Sheet 2 of 5)

NOTE

Fuel primer inlet line tube assembly

on some tanks may be one solid

tube.

If your tank has solid tube, skip

steps 2 through 10 and go on to step

11.

To replace solid tube, order three

tube sections and two nipples.

2.

Using socket, remove screw and lockwasher (D).

Remove clamp (E).

Throw lockwasher away.

3.

Using 5/8 inch wrench, hold nipple (F).

4.

Using 5/8 inch wrench, remove two nuts (G) and

(H).

5.

Remove tube assembly (C).

NOTE

Traverse turret as necessary to get at the following parts.

NOTE

It may be necessary to slightly bend tube assembly (A) before it can be placed in

position.

6.

Using socket, remove screw and lockwasher (J).

Remove clamp (K).

Throw lockwasher away.

7.

Using 7/16 inch wrench, remove screw and lockwasher (L).

Remove clamp (M).

Throw lockwasher away.

8.

Using 5/8 inch wrench, hold nipple (N).

9.

Using 5/8 inch wrench, remove nuts (P) and (Q) from nipple (N).

10.

Remove tube assembly (R).

Go on to Sheet 3

TA148387

7-312