TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 590 of 772

TM 9-2350-260-20-1-2

PRIMER PUMP REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1.

Disconnect two electrical connectors (A) located

on handle support bracket (B) by pulling apart.

2.

Raise handle to the up position.

Using 7/16 inch

wrench, remove bolt and wire bracket (C).

3.

Using 9/16 inch wrench, remove heater tube nut

(D) and outlet tube nut (E) from primer pump (F).

4.

Pull back two tubes (G) from primer pump (F).

5.

Using 9/16 inch wrench, remove inlet tube nut (H)

from tee (J).

6.

Using 1/2 inch wrench, remove tee (J) and adapter

(K) from primer pump (F).

Go on to Sheet 3

TA148396

7-321