TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 597 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 4)

NOTE

Some 2D engines have a filtering disc

between elbow (H) and nozzle, and a

filter between bushing (K) and nozzle

(L.

Remove and throw away filter and

disc if present

6.

Using 7/16 inch wrench, remove elbow (H).

7.

Using 7/16 inch wrench, remove elbow (J).

8.

Using 5/8 inch wrench, remove bushing (K) from

nozzle (L).

9.

Inspect all items disconnected or removed for

cracks, nicks, or other damage.

Replace as

necessary.

INSTALLATION:

NOTE

Position and install elbows as shown.

NOTE

Some 2D engines require a filtering

disc between elbow (A) and nozzle,

and a filter between bushing (B) and

fuel nozzle.

1.

Install elbow (A).

Using 7/16 inch wrench, tighten

elbow.

2.

Install bushing (B).

Using 5/8 inch wrench, tighten

bushing.

3.

Install elbow (C).

Using 7/16 inch wrench, tighten

elbow.

Go on to Sheet 4

TA148403

7-328