TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 600 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER NOZZLE REPLACEMENT (Sheet 2 of 3)

REMOVAL:

1.

Using two 7/16 inch wrenches, disconnect fuel

inlet line (A) from elbow (B).

2.

Using 7/16 inch and 9/16 inch wrenches,

disconnect fuel return line (C) from elbow.

3.

Using 1 inch wrench, loosen jamnut (D).

4.

Using 13/16 inch wrench, remove nozzle (E) and

fitting from manifold heater (F).

5.

Using 7/16 inch wrench, remove elbow (G) and (if

present) filtering disc from nozzle.

Throw filtering

disc away.

6.

Using 5/8 inch and 7/16 inch wrenches, remove

elbow (B) from nozzle.

7.

Using 5/8 inch and 13/16 inch wrenches, remove

bushing (H) and (if present) filtering disc.

Throw

filtering disc away.

8.

Throw nozzle (E) away.

9.

Inspect all parts disconnected or removed.

Replace all items as necessary.

Go on to Sheet 3

TA148406

7-331