TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 601 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER NOZZLE REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

NOTE

On 2D engines, install new filter

between bushing (A) and nozzle (B)

and new filtering disc between elbow

(D) and nozzle.

1.

Using 13/16 inch and 5/8 inch wrenches, install

bushing (A) in new nozzle (B).

2.

Using 5/8 inch and 7/16 inch wrenches, install

elbow (C) to bushing (A).

3.

Using 7/16 inch wrench, install elbow (D) into

nozzle (B).

4.

Install nozzle (B) and fittings into manifold heater

(E).

5.

Aline nozzle for ease of connecting fuel lines.

Using 1 inch wrench, tighten jamnut (F).

6.

Using two 7/16 inch wrenches, connect inlet fuel

line (G) to elbow (C).

7.

Using 7/16 inch and 9/16 inch wrenches, install

return fuel line (H) to elbow (D).

8.

Perform manifold heater operational check (page

7-324).

9.

Install 2A powerplant (page 5-14) or 2D

powerplant (page 5-40).

End of Task

TA148407

7-332