TM 9-2350-260-20-1-2
MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using 3/4 inch wrench, disconnect ignition lead (A)
from spark plug (B)
NOTE
Use suitable container to catch fuel
spillage whenever any fuel line or
fitting is loosened or removed.
2.
Using 7/16 inch wrench, disconnect fuel input tube (C) from elbow (D).
3.
Using 9/16 inch wrench, disconnect fuel return tube (E) from elbow (F).
4.
Using 1/2 inch wrench, remove four nut and washer (G).
Throw nut away.
5.
Remove manifold heater (H) and gasket (J).
Throw gasket away.
Go on to Sheet 3
TA148402
7-327