TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 587 of 772

TM 9-2350-260-20-1-2

PERSONNEL HEATER FUEL LINE REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Position tube assembly (A) in tank.

2.

Using 5/8 inch wrench, install tube assembly (A)

on elbow (B) and tighten securely.

NOTE

Be sure to inspect the routing of tube assembly (A) from personnel heater fuel

pump to primer pump.

Make sure it is not bent or crimped.

3.

Using 5/8 inch wrench, connect fitting (C) to tee (D) of the primer pump (E) and tighten securely.

4.

Install clamp (F) on tube (A).

5.

Using 7/16 inch wrench, install screw and new

lockwasher (G) through clamp (F) and tighten.

6.

Wipe up any fuel spills.

End of Task

TA148393

7-318