TM 9-2350-260-20-1-2
MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 2 of 7)
NOTE
Use suitable container to catch any fuel that may leak out whenever any part of
fuel system is loosened or disconnected.
REMOVAL:
1.
Using screwdriver and 1/2 inch wrench, remove two screws and washers (A) from two clamps (B).
2.
Using fingers, remove clamps (B) from tube assembly (C).
Go on to Sheet 3
TA148418
7-343