TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 616 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 6 of 7)

5.

Using 9/16 inch wrench, install elbow (F) on

adapter (G).

6.

Using 9/16 inch wrench on elbow (F) and

adjustable wrench on tee (H), install elbow (F) on

tee (H).

7.

Using 1/2 inch wrench, install adapter (G), elbow

(F), and tee (H) to solenoid valve (J).

8.

Using 9/16 inch wrench, install tube assembly line

nut of tube (K) on tee (H).

9.

Using 9/16 inch wrench, install line nut of tube

assembly (C) on tee (H).

10.

Position solenoid valve (J) on bracket (L).

11.

Using 5/16 inch wrench, install two screws and

washers (M) through bracket (L) and into solenoid

valve (J).

12.

Using fingers, install grommet (E) in slot of lower

engine cooling fan shroud (N).

13.

Using both hands, install lower engine cooling fan

shroud (N) over mounting holes in engine

bulkhead.

14.

Using hands, manually install four screws and

washers (P) in lower engine cooling fan shroud

(N).

15.

Using socket and 1/2 inch wrench, tighten four

screws and washers (P) in lower engine cooling

fan shroud (N).

Go on to Sheet 7

TA148422

7-347