TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 625 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (2D ENGINE) (Sheet 2 of 3)

REMOVAL:

WARNING

Ignition coils on engine are capable

of producing extremely high voltage.

Output of this ignition system is

sufficient to cause a dangerous

electrical shock.

Never touch any

uncovered or live connections.

1.

Using 3/4 inch wrench, disconnect cable (A) from

spark plug (B).

2.

Using wrench, disconnect electrical connector (C)

from coil (D).

3.

Using 7/16 inch socket, remove two screws (E)

and cable clamp (F).

4.

Using 1/2 inch socket, extension, and 1/2 inch

wrench, remove two screws (G) and cable bracket

(H).

5.

Using hands, put down pressure on coil (D) to give

access to screws (J).

6.

Using 1/2 inch socket and extension, remove two

screws (J).

7.

Remove coil (D), lead (A), and clamps (K) as a

unit.

8.

Remove clamps (K) from coil (D).

9.

Using 7/8 inch wrench, disconnect cable (A) from

coil (D).

INSPECTION:

1.

Inspect clamps and coil for cracks or other damage.

2.

Check continuity and insulation resistance of cable.

3.

Replace faulty parts as required.

Go on to Sheet 3

TA148431

7-356