TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

  TM-9-2350-260-20-1-2 - Page 622 of 772

TM 9-2350-260-1-2
MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (2A ENGINE) (Sheet 2 of 3)
REMOVAL:
WARNING
Ignition coils on engine are capable
of producing extremely high voltage.
Output of this ignition system is
sufficient to cause a dangerous
electrical shock.
Never touch any
uncovered or live connections.
1.
Using 3/4 inch wrench, disconnect cable (A) from
spark plug (B).
2.
Using spanner wrench, disconnect electrical
connector (C) from coil (D).
3.
Using 1/2 inch socket, and 1/2 inch wrench,
remove two screws and nuts (E).
4.
Remove coil (D), lead (A), and clamps (F) as a
unit.
5.
Remove clamps (F) from coil (D).
6.
Using 7/8 inch wrench, disconnect cable (A) from
coil (D).
INSPECTION:
1.
Inspect clamps and coil for cracks or other damage.
2.
Check continuity and insulation resistance of cable.
3.
Replace faulty parts as required.
Go on to Sheet 3
TA148428
7-353


Back to Top