TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 623 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (2A ENGINE) (Sheet 3 of 3)

INSTALLATION:

1.

Using 7/8 inch wrench, connect cable (A) to coil

(B).

2.

Position two clamps (C) onto coil (B).

3.

Position coil (B) and clamps (C) on bracket

3.

Using 1/2 inch socket and 1/2 inch wrench, install

two screws and nuts (D) to bracket.

4.

Connect cable (A) to spark plug (E).

5.

Using 3/4 inch wrench, tighten cable (A) at spark

plug (E).

6.

Alining keyway, connect electrical connector (F) to

coil (B).

7.

Using spanner wrench, tighten electrical connector

(F).

8.

Perform manifold heater operational check (page

7-324).

9.

Install powerplant (page 5-14).

End of Task

TA148429

7-354