TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 613 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 3 of 7)

3.

Using socket and 1/2 inch wrench, remove four

screws and washers (D) from lower engine cooling

fan shroud (E).

4.

Using screwdriver, remove two screws and

washers (F) from lower engine cooling fan shroud

(E).

(Left screw is hidden.

You will have to feel

for it.)

NOTE

Engine cooling fan shroud (E) must

be slightly displaced in step 5 to

allow

clearance

for

removal

of

manifold heater return tube (C).

5.

Using hammer handle, tap on bottom of engine

cooling fan shroud (E).

Second person, using

screwdriver, pry up on front lip of cooling fan

shroud and slightly displace it.

6.

Using fingers, remove grommet (G) from tube

assembly (C).

7.

Using 9/16 inch wrench, remove line nut of tube

assembly (C) from elbow (H) on manifold heater

(J).

Go on to Sheet 4

TA148419

7-344