TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 614 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 4 of 7)

8.

Using 9/16 inch wrench, remove line nut of tube

assembly (C) from tee (K).

9.

Using 9/16 inch wrench, remove line nut of tube

assembly (L) from tee (K).

10.

Using 5/16 inch wrench, remove two screws (M)

and pull solenoid valve (N) forward approximately

one inch.

11.

Using 1/2 inch wrench on coupling (P), remove

coupling with elbow and tee attached.

12.

Using 9/16 inch wrench on elbow (O) and

adjustable wrench on tee (K), remove tee (K) from

elbow (Q).

13.

Using 9/16 inch wrench on elbow (Q) and 1/2 inch

wrench on coupling (P), remove elbow (Q) from

coupling (P).

14.

Push engine cooling fan shroud aside to allow

clearance for removal of tube assembly (C).

Other

person, using both hands, carefully remove tube

assembly (C) from engine.

CLEANING AND INSPECTION:

1.

Using clean rags and dry cleaning solvent (Item 54, Appendix D), clean fittings thoroughly.

2.

Inspect fittings for nicks, cracks, thread damage, or wear.

Replace if required.

3.

Inspect internal threads of manifold heater and solenoid adapter for damage.

Go on to Sheet 5

TA148420

7-345