TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 633 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 7 of 10)

Input Solenoid Valve Replacement (Sheet 2 of 5)

NOTE

Use suitable container to catch fuel that may leak whenever any part of fuel system

is loosened or disconnected.

REMOVAL:

1.

Disconnect electrical lead (A) from solenoid valve (B).

2.

Using 7/16 inch and 1/2 inch wrenches, disconnect two fuel lines (C) from tee (D).

3.

Using 1/2 inch and 5/8 inch wrenches, remove fuel line (E) from adapter (F).

4.

Using 5/16 inch wrench, remove two screws and washers (G).

5.

Using screwdriver, remove two screws (H) with lockwashers and flat washers.

Throw lockwashers away.

6.

Remove solenoid valve (B), fuel filter (J), and attached fittings as a unit

Go on to Sheet 3

TA148439

7-364