TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 636 of 772

TM 9-2350-260-20-1-2

MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 10 of 10)

Input Solenoid Valve Replacement (Sheet 5 of 5)

7.

Position solenoid valve (B) and fuel filter (E) with attached fittings to brackets on engine.

8.

Install two screws (H) with new lockwashers and flat washers to secure fuel filter (E) to engine bracket.

Using

screwdriver, tighten screws.

9.

Install two screws and washers (J) to secure solenoid valve (B) to bracket.

Using 5/16 inch wrench, tighten screws.

10.

Connect two fuel lines (K) to tee (C).

Using 7/16 inch wrench, tighten fuel line nuts.

11.

Connect hose assembly (L) to adapter (M).

Using 1/2 inch and 5/8 inch wrenches, tighten hose nut to adapter.

12.

Connect electrical lead (N) to solenoid valve (B).

13.

Operate primer pump (TM 9-2350-260-10).

Check for leaks.

If leaks are found, tighten connections as required.

14.

Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40).

End of Task

TA148442

7-367