TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 645 of 772

TM 9-2350-260-20-1-2

ACCELERATOR LINKAGE ADJUSTMENT (Sheet 1 of 8)

TOOLS:

Long round nose pliers

9/16 in. combination box and open end wrench (2 required)

1/2 in. combination box and open end wrench (2 required)

7/16 in. combination box and open end wrench

Flashlight

FABRICATED TOOL:

Throttle linkage adjusting go/no-go gage (Figure F-3, Appendix F)

SUPPLIES:

1/8 in. dia. by 2 by 4 in. long locating pins (2 required)

1/16 in. dia. by 2 in. long pin

Cotter pin (MS24665-281) (4 required)

PERSONNEL:

Two

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURE:

Place shift lever in P (park) position (TM 9-2350-260-10)

Block tracks to prevent tank movement (TM 9-2350-260-10)

Remove upper engine access cover (page 16-44)

Go on to Sheet 2

TA148451

7-376