TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

  TM-9-2350-260-20-1-2 - Page 643 of 772

TM 9-2350-260-20-1-2
MANIFOLD HEATER FUEL FILTER, ELEMENT, AND INPUT FUEL LINE REPLACEMENT (Sheet 7 of 8)
Fuel Filter Element Replacement (Sheet 2 of 2)
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi.
Use only with
effective chip guarding and personal protective equipment (goggles/shield, gloves,
etc.).
5.
Wipe out bowl (A) and dry with compressed air.
INSTALLATION:
1.
Position new filter element (C) in filter bowl (A).
2.
Position new preformed packing (B) over lip of
filter bowl (A) and install to filter head (D).
3.
Using wrench, tighten filter bowl (A) to filter head
(D).
4.
Operate primer pump (TM 9-2350-260-10) and
check for leaks.
If leak is found, tighten filter bowl.
5.
Install lower engine access cover (page 16-46).
End of Task
TA148449
7-374


Back to Top