TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 654 of 772

TM 9-2350-260-20-1-2

ACCELERATOR PEDAL RETURN SPRING ADJUSTMENT (Sheet 1 of 2)

TOOLS:

7/16 in. combination box and open end wrench

Spring scale

REFERENCE:

TM 9-2350260-10

PRELIMINARY PROCEDURES:

Place shift lever in P (park) position (TM 9-2350-260-10)

Disconnect accelerator linkage at powerplant (page 7-87, steps 28 and 29)

ADJUSTMENT:

1.

Using spring scale (A), as shown from behind, check pressure required to depress accelerator pedal (B).

2.

Scale should read between 7 and 8 pounds.

3.

If scale reads more than 8 pounds, perform steps 5 thru 7.

4.

If scale reads less than 7 pounds, perform steps 9 thru 11.

Go on to Sheet 2

TA148460

7-385