TM 9-2350-260-20-1-2
ACCELERATOR PEDAL REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
1.
Using 9/16 inch wrench, install nut (A) and screw (B) onto accelerator pedal (C).
2.
Install accelerator pedal (C) onto control rod (D).
3.
Install two woodruff keys (E) onto control rod (D) and aline accelerator pedal (C) on woodruff keys (E).
4.
Using 7/16 inch wrench, install two screws and new lockwashers (F) securing accelerator pedal (C) to control rod
(D).
5.
Using vise, install two new bearings in housing (G) if bearings were removed.
Using hands, install housing (G) onto
control rod (D).
6.
Install woodruff key (H) onto control rod (D).
7.
Position accelerator pedal (C), control rod (D), and attached parts in tank as a unit.
Go on to Sheet 4
TA148468
7-393