TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 666 of 772

TM 9-2350-260-20-1-2

ACCELERATOR FOOT PEDAL CONTROL ROD AND RELATED PARTS REPLACEMENT (Sheet 3 of 4)

5.

Install housings (G) and (H) in vise.

6.

Using hammer and punch, drive out two bearings

(J).

CLEANING AND INSPECTION:

1.

Using dry cleaning solvent (Item 54, Appendix D)

and clean rags, clean all parts.

2.

Check all parts for bends, wear in holes, and other

defect.

Replace defective parts.

3.

Inspect bearings in housings.

If defective or worn,

replace.

INSTALLATION:

1.

Position bearing (B) into each side of housing (A).

2.

Using vise, press bearings (B) into housing (A) until they are flush with housing surface.

Go on to Sheet 4

TA148504

7-397